features - high reliability for low cost - temperature stability of +-1 ppm available - excellent phase noise performance - low power consumption - cheapest available leaded smd-tcxo in metal package series package clipped sine wave vs. temperature vs. supply voltage vs. load vs. aging operating temperature range storage temperature range voltage current voltage standard option external control voltage 10 hz offset from carrier 100 hz offset from carrier 1 khz offset from carrier 10 khz offset from carrier 100 khz offset from carrier pin 1 pin 2 pin 3 pin 4 supply voltage - extended temperature range to -40/+85c available clipped sine wave frequency range not connected or control voltage -155 dbc/hz 10 k ? / 10 pf +-5 ppm min. by external control voltage +3.3 vdc +-5% case ground output 1.65 vdc +-1.35 vdc -150 dbc/hz -80 dbc/hz -105 dbc/hz -140 dbc/hz M4311 smd-package 11.4 x 9.6 x 2.5 mm3 10.0 ~ 35.0 mhz +-3 ppm min. per internal trimmer -40/+85c 2 ma max. 0.7 v peak to peak min. -0/+50c ~ -40/+85c +-1 ~ +-5 ppm +-0.5 ppm max. / 3.3 vdc +-5% +-0.2 ppm max. / 10 pf ~ 20 pf +-1 ppm max. per year petermann-technik | amselweg 8 | d-86916 kaufering fon: 00 49 (0) 81 91 / 30 53 95 | fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de other parameters are available on request / create here your specification load output frequency stability pin connection signal frequency adjustment phase noise (typical) input petermann technik time & frequency components
petermann technik time & frequency components petermann-technik | amselweg 8 | d-86916 kaufering fon: 00 49 (0) 81 91 / 30 53 95 | fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de part numbering guide example m4300-s-j-10-s-v-27.000mhz series m4300 s = clipped sine wave t = ttl output signal h = hcmos j = 0/+50c n = -10/+60c x = 0/+70c m = -20/+70c k = -30/+75c temperature range w = -40/+85c 10 = +-1.0 ppm 15 = +-1.5 ppm 20 = +-2.0 ppm 25 = +-2.5 ppm 50 = +-5.0 ppm stability vs. temperature x = other value - please indicate your required value blank = 40/60% symmetry for hcmos / ttl s = 45/55% v = 1.65 +-1.35 vdc for +-5 ppm min. vctcxo option x = other value - please indicate your required value frequency frequency in mhz outline drawing m4300 0.9max 4-00.45+0.03 6 . 0 + 0 . 5 8 . 5 m a x #1 #7 #14 #8 10.7+0.15 5 . 3 5 + 0 . 1 5 7 .62+0.3 15.24+0.15 connection pin #1 #7 #8 #14 n.c. or control voltage case ground output v dd unit:mm - - - - - - 20.7max 1 3 . 0 8 m a x #1mark
petermann technik time & frequency components petermann-technik | amselweg 8 | d-86916 kaufering fon: 00 49 (0) 81 91 / 30 53 95 | fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de test circuit for hcmos test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #7 #8 #14 c =15pf l note: cl includes probe and fixture capacitance v cc control voltage test circuit for ttl test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #7 #8 #14 1n4148 or equiv control voltage note: cl includes probe and fixture capacitance v dd r=390 l c =15pf l test circuit for clipped sine wave test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #7 #8 #14 c =10pf l n.c. or control voltage note: cl includes probe and fixture capacitance v dd 10k (hcmos load) tr tf th t v ol duty=th/t v oh 90%v dd 50%v dd 10%v dd (ttl load) tr tf th t v ol duty=th/t v oh 2.4v 1.4v 0.4v 0.0v dc v p-p 0.7v min clipped sine wave
|
